26 Gal. Moonshine, E-85 Ethanol Still 4 Bubble Plate Copper & Stainless Column. Everything Included
- 1" drain valve.
- 26 gallon capacity boiler
- Boiler is 28" tall
- Column is 41" tall
- Carrying handles
- 1.5" filler port with tri clamp cap
- 4" column connection
- Top quality construction with beautifully rounded curves
- Built from heavy gauge 304 food grade stainless steel & heavy gauge copper
- The boiler is polished to a mirror finish inside and out
- Thermo port and commercial grade thermometer with a 3" face
- This is a bubble plate column so no copper packing is needed
- 1 removable 4" gatling gun (tube & shell) dephlegmator (pre-condenser) on top of the column
- 1 removable 2" diameter gatling gun (tube & shell) primary condenser
- 4 bubble plates in the column
- 4 removable 3" sight glasses
- This column's modular construction allows you to remove plates or column sections for different flavor profiles
- 1 removable stainless parrot with drain valve for first shots
- (2) 2" heating element ports
- 16 feet of 1/2" Tubing (8 feet of clear tubing, and 8 feet of red/orange tubing)
- (2) 1/2" Push to Connect Flow Tees
- (1) 1/2" Push to Connect Union Tees
- (1) 1/2" Push to Connect Union Y
- (4) 1/2" Push to Connect 90° with Male NPT Pipe Fittings
- (2) 1/2" Male Straight Pipe Fittings
This Controller works great for 20 to 35 gallon stills and still boilers as well as our beer keg stills up to 15.5 gallons (must have 2 element ports). You will need to attach your own 60 amp 220 VAC dryer or welding plug to the main power cord so that you can plug the controller in. If you are going to use this heating element controller with your own boiler your boiler will need two 2" tri clamp ferrules, two 2" tri clamps and two 2" silicone gasket. This controller draws 50 amps @ 11,000 watts 220 VAC Single Phase.
This controller includes:
- (2) Ultra Low Watt Density Heating Element
- (1) Variable Temperature Control
- (2) 30 Amp Twist Lock Male Plugs
- (2) 30 Amp Twist Lock Female Plugs
- (2) 30 Amp Double Pole Switches
- (1) 40 Amp SSRs
- (2) 30 Amp 2 Pole Breakers
- (1) 30 Amp Panel Meter
- (2) 12' cords from the Controller to the Element Boxes
- (1) Lidded enclosure
- (2) Green Power On Lights
This item comes with a 1 year warranty which covers manufacturing defects and leaks.
Built to last a Life Time!
Hand it down to future generations!
DETERMINING TRI CLAMP SIZE
Tri Clamp sizes are determined by the outer diameter of the pipe or tubing, not the outer diameter of the flange or Tri Clamp itself. The flange of a Tri Clamp fitting typically has about a ½” inch greater diameter than the outside diameter of the pipe. This can become especially confusing when the Tri Clamp fitting has no pipe attached to it, as is the case with adapters, For instance, a 1.5" Tri Clamp to 1/2" hose barb adapter is not 1.5" inches in any dimension, but the Tri Clamp end will fit any other 1.5" Tri Clamp fitting.
If you have any doubts about what size Tri Clamp fittings your project needs, simply measure the outside diameter of the flange (dimension "B" below) and consult the chart below, or feel free to contact us .
|
|
Pipe Outer Diameter |
Flange Outer Diameter |
Pipe Inner Diameter |
|
|
1" |
1.98" |
.87" |
|
1.5" |
1.98" |
1.37" |
|
|
2" |
2.52" |
1.87" |
|
|
2.5" |
3.05" |
2.37" |
|
|
3" |
3.58" |
2.87" |
|
|
4" |
4.68" |
3.83" |
|
|
6" |
6.57" |
5.78" |
|
|
8" |
8.57" |
7.78" |
|
|
10" |
10.57" |
9.69" |
|
|
12" |
12.57" |
11.81" |
Disclaimer:
