26 Gal Moonshine with 4" Borosilicate Glass 4 Plate Column Everything Included
This Still has a beautiful 4" Diameter Borosilicate Glass 4 Plate Column with Gatling Gun (Tube & Shell) Dephlagmator on top of the Column and a 2" Gatling Gun (Tube & Shell) Condenser on the right side of the column. The column can be ran in Pot Still Mode to make Whiskey and Moonshine or it can be ran in reflux mode to make high proof Vodka or E-85 Ethanol.
- 1" drain valve
- 26 gallon capacity
- Boiler is 28" tall, and has a base diameter of 19 3/4"
- Column is 41" tall
- Carrying handles
- 2" filler port with tri clamp cap
- 4" column connection
- Top quality construction with beautifully rounded curves
- Built from heavy gauge 304 food grade stainless steel
- The boiler is polished to a mirror finish inside and out
- Thermo port and commercial grade thermometer with a 3" face
- This is a glass bubble plate column so no copper packing is needed
- 1 removable 4" Gatling gun (tube & shell) dephlegmator (pre-condenser) on top of the column
- 1 removable 2" diameter Gatling gun (tube & shell) primary condenser
- 4 bubble plates in the column
- This column's modular construction allows you to remove the bubble plates
- 1 removable stainless parrot with drain valve for first shots
- (2) 2" heating element ports
- Internals of glass bubble plate column are copper
- Complete 360 viewing
- 16 feet of 1/2" Tubing (8 feet of clear tubing, and 8 feet of red/orange)
- (2) 1/2" Push to Connect Flow Tees
- (1) 1/2" Push to Connect Union Tees
- (1) 1/2" Push to Connect Union Y
- (4) 1/2" Push to Connect 90 with Male NPT Pipe Fitting
- (2) 1/2" Male Straight Pipe Fittings
- (2) Ultra low watt density heating element
- (1) Variable temperature control
- (2) 30 amp twist lock male plugs
- (2) 30 amp twist lock female plugs
- (2) 30 amp double pole switches
- (1) 40 amp ssrs
- (2) 30 amp 2 pole breakers
- (1) 30 amp panel meter
- (2) 12' cords from the controller to the element boxes
- (1) lidded enclosure
- (2) frenn power on lights
DETERMINING TRI CLAMP SIZE
Tri Clamp sizes are determined by the outer diameter of the pipe or tubing, not the outer diameter of the flange or Tri Clamp itself. The flange of a Tri Clamp fitting typically has about a ½” inch greater diameter than the outside diameter of the pipe. This can become especially confusing when the Tri Clamp fitting has no pipe attached to it, as is the case with adapters, For instance, a 1.5" Tri Clamp to 1/2" hose barb adapter is not 1.5" inches in any dimension, but the Tri Clamp end will fit any other 1.5" Tri Clamp fitting.
If you have any doubts about what size Tri Clamp fittings your project needs, simply measure the outside diameter of the flange (dimension "B" below) and consult the chart below, or feel free to contact us .
|
|
Pipe Outer Diameter |
Flange Outer Diameter |
Pipe Inner Diameter |
|
|
1" |
1.98" |
.87" |
|
1.5" |
1.98" |
1.37" |
|
|
2" |
2.52" |
1.87" |
|
|
2.5" |
3.05" |
2.37" |
|
|
3" |
3.58" |
2.87" |
|
|
4" |
4.68" |
3.83" |
|
|
6" |
6.57" |
5.78" |
|
|
8" |
8.57" |
7.78" |
|
|
10" |
10.57" |
9.69" |
|
|
12" |
12.57" |
11.81" |
