MK III Do It Yourself Kit Closed Loop Essential Oil Extractor

$ 1,137.55

MK III Herbinator Do It Yourself Kit for Essential Oil Extraction. SS304

The Do It Yourself Kit for the MK III contains all the parts and pieces needed to build you very own MK III. The detailed step-by-step guide that comes with this extractor will get you set up in no time.

The MK III Herbinator is a closed loop reclamation essential oil extractor designed by Skunk Pharm Research. This oil extractor is designed to be used with butane, hexane or propane.

Our DIY extractor comes standard with a 1.5" x 36" (200 Gram) Column, but can support a column up to 3" x 36" (900 gram) column, or can be downgraded to a 1.5" x 12" (73 gram) column. You can also upgrade your base for this column. The columns and bases can be found in other sections of our online store if you chose to purchase them separately.

The MK III Herbinator is manufactured out of 304 food grade stainless steel, and meets all of today's sanitary standards.

Parts List for the DIY MK III Extractor are as follows:

(1) 6" Welded Herbinator Lid
(1) 1.5" Tri Clamp x 1/4" Female NPT Cap
(1) 1.5" Tri Clamp End Cap
(5) 1.5" Single Hinge Tri Clamps
(1) 1.5" x 36" (200 Gram) Column
(1) 1.5" x 1" x 1/4" Concentric Reducer
(1) 1" 3-Piece Ball Valve with Tri Clamp Fittings
(2) 6" Single Hinge Tri Clamps
(1) 6" x 6" Tri Clamp Base
(1) 6" Tri Clamp End Cap
(4) 1" Viton Gaskets
(2) 6" Viton Gaskets
(2) 1.5" 150 Mesh Viton Screen Gaskets
(3) 1/4" 1000# WOG Valves
(1) 3/8" 1000# WOG Valve
(5) 1/4" MNPT x 1/4" MJIC
(1) 3/8" MNPT x 3/8" MNPT
(1) 1/4" MNPT x 1/4" MNPT
(1) 3/8" 4-Way Cross
(2) 3/8" MNPT x 1/4" FNPT Bushings
(1) 3/8" MNPT x 3/8" MJIC
(1) 1/4" Hex End Cap
(1) 6' by 1/4" SAE Female PTFE Lined Stainless Steel Braided Hose
(1) Roll PTFE Tape

Features:

Closed Loop and Eco Friendly (Reclaim 99.9% of your solvent)
Expandable (Increase the sizes of not only your columns, but your collection pot as well!)
Stainless Steel Construction
Excellent Yields

Additional Items needed for operation:

Recovery Pump
Vacuum Pump
Condensing Coil
Recovery Tank
Refrigerant Scale
Butane

DETERMINING TRI CLAMP SIZE

Tri Clamp sizes are determined by the outer diameter of the pipe or tubing, not the outer diameter of the flange or Tri Clamp itself. The flange of a Tri Clamp fitting typically has about a ½” inch greater diameter than the outside diameter of the pipe. This can become especially confusing when the Tri Clamp fitting has no pipe attached to it, as is the case with adapters, For instance, a 1.5" Tri Clamp to 1/2" hose barb adapter is not 1.5" inches in any dimension, but the Tri Clamp end will fit any other 1.5" Tri Clamp fitting.

If you have any doubts about what size Tri Clamp fittings your project needs, simply measure the outside diameter of the flange (dimension "B" below) and consult the chart below, or feel free to contact us .

Pipe Outer Diameter A	Flange Outer Diameter B	Pipe Inner Diameter C
1"	1.98"	.87"
1.5"	1.98"	1.37"
2"	2.52"	1.87"
2.5"	3.05"	2.37"
3"	3.58"	2.87"
4"	4.68"	3.83"
6"	6.57"	5.78"
8"	8.57"	7.78"
10"	10.57"	9.69"
12"	12.57"	11.81"

Disclaimer:

Depending on the type of oil you are extracting, these product(s) may not be legal to operate in some areas. For safety reasons, these product(s) are designed and intended for outdoor use only. ADE, LLC strongly discourages any unlawful use of these product(s), and is not responsible for any damage or injury caused by the misuse or unlawful use of these product(s). Any person or entity that uses the equipment and/or information provided by ADE, LLC does so entirely at their own risk, and accepts all liability concerning the use of the product(s) and information listed above.

*WARNING* Never extract with butane or propane indoors. May cause serious injury, or even death.