Menu
Cart 0
400 Gallon Stripping Still

400 Gallon Stripping Still

  • $ 24,744.38


Our 400 gallon Stripping Stills should be heated by Low Pressure Steam Boiler. Our 400 gallon Stripping Still is 10'2" tall but it can be scaled down to 9' 11" tall. The width of this Stripping still, including the condenser is 13.5'. This Still is great for stripping and it with the optional bubble plate, it can be used for Brandy, Moonshine and Whiskey. This Still comes Standard with:

400 Gallon Operating Capacity 304SS Stainless Steel Boiler
460 Gallon Actual Capacity
5hp 230vac 3 phase 0 rpm to 150 rpm Variable Speed Agitator
16" Clamp Down Manway
4" Sight Glass in the Manway
5 PSI Pressure Relief Valve on the Inner Boiler
5 PSI Vacuum Relief Valve on the Inner Boiler
25 PSI ASME Pressure Relief Valve On the Jacket
15 PSI Steam Jacket
Insulation Jacket
4" Tri Clamp Butterfly Valve on the drain
12" Diameter Stripping Column
4" Sight Glass in the Column
1 CIP Spray Ball in the Column
2 CIP Spray Balls in the Boiler
4" Face 0°F to 250°F Thermometer in the Column
3" Face 0°F to 250°F Thermometer on the inner Boiler
10"x44" Tube and Shell Condenser
Stainless Parrot's Beak
Bolt to the Floor Stainless Table Stand or Stainless Column Stand for the Condenser, You Pick.
10' 6" Overall Height
Mirror Polish Inside and Out
Base Price: $21,995.00
Options:
Bubble Plate with Drain Valve behind the Sight Glass in the Column: $955.00
Upgrade to an 18" Manway: $495.00
Upgrade to a 24" Manway: $789.00
Extra Thermowell in the column for a Temperature Probe: $55.00
CIP System with Plumbing and Pump: $1,795.00
Low Profile 9'11" Overall Height: $2,100.00
Gin Basket just before the Primary Condenser: $2,955.00

DETERMINING TRI CLAMP SIZE

Tri Clamp sizes are determined by the outer diameter of the pipe or tubing, not the outer diameter of the flange or Tri Clamp itself. The flange of a Tri Clamp fitting typically has about a ½” inch greater diameter than the outside diameter of the pipe. This can become especially confusing when the Tri Clamp fitting has no pipe attached to it, as is the case with adapters, For instance, a 1.5" Tri Clamp to 1/2" hose barb adapter is not 1.5" inches in any dimension, but the Tri Clamp end will fit any other 1.5" Tri Clamp fitting. 

If you have any doubts about what size Tri Clamp fittings your project needs, simply measure the outside diameter of the flange (dimension "B" below) and consult the chart below, or feel free to contact us .

 

 

Pipe Outer Diameter
A

Flange Outer Diameter
B

Pipe Inner Diameter
C

Tri Clamp Dimension Diagram

1"

1.98"

.87"

1.5"

1.98"

1.37"

2"

2.52"

1.87"

2.5"

3.05"

2.37"

3"

3.58"

2.87"

4"

4.68"

3.83"

6"

6.57"

5.78"

8"

8.57"

7.78"

10"

10.57"

9.69"

12"

12.57"

11.81"

 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

We Also Recommend